■ Charge the battery
This navigation device has an internal, nonremovable, rechargeable
battery. Do not attempt to remove the battery from the device, as you
may damage the device.
Connect the DC-3 charger to the charger
connector on the navigation device, and
insert the charger plug into the cigarette
lighter socket of your car. Power must be
supplied by the 9- to 18-volt car battery.
Ensure that the charger is properly inserted
in the cigarette lighter socket and does not
interfere with the normal operation of the
car.
In some car models, the cigarette lighter
socket is powered by the car battery even
when you remove the ignition key. In those
cases, the car battery might be discharged if the navigation device is left
on, or if the device is turned off but connected to the cigarette lighter
socket for a long time. Contact the vehicle manufacturer for more
information.
When you charge the battery, the yellow indicator light flashes. If
charging does not start, disconnect the charger, plug it in again, and
retry. When the battery is fully charged, the indicator light turns off.
Once the battery is fully charged, disconnect the charger from the
navigation device and the cigarette lighter socket.
When battery power is low, the red indicator light flashes and the
battery icon at the top of the application menu screen shows no green
bars.
You can use the navigation device while it is connected to the cigarette
lighter socket.
G e t s t a r t e d
10